2-Pac Polyurethane

2-Pac Polyurethane is a unique, high-build, rapid curing protective coating that is specifically formulated to enhance the appearance of internal timber surfaces and to impart a degree of protection rarely achieved by similar coatings. Polyurethane has three main advantages over many other 2-packs. It is available in three gloss levels (matt, semi-gloss, high-gloss) and is normally applied by spray gun.

Maintenance Instructions

Cleaning - Normal maintenance consists of wiping down with a damp cloth. Detergents, cleansers (liquids such as 'Handy Andy', 'Spray & Wipe', etc) and other cleaning agents are all suitable. 'Harsh' cleansers such as 'Ajax' may also be used, although not on a regular basis and may effect gloss level. Glulam Solid Timber Benchtops will readily take the punishment associated with day-to-day usage within the household environment. Products that should be avoided are those containing silicon compounds (such as 'Mr Sheen'); silicon can imbed itself in the chemical structure of the polyurethane coating making subsequent recoating difficult.

Protection - Use cutting boards to avoid undue knife damage (any material will cut!), and under appliances such as electric jugs to avoid extremes of heat in small areas.

Repairs - Regardless of damage that may occur, repairs are relatively simple. Minor scratches can be buffed out with an abrasive polish or touched up.

If impact damage occurs (dents - where timber is compressed), this can be restored with a damp cloth and very hot iron. By placing the cloth over the dent and ironing over it, water vapour is forced into the fibres and the timber will ultimately restore itself to normal. Keep the cloth damp - a spluttering sound is normal

Hard Wearing - Solid Timber has been designed for use in kitchens, laboratories and other commercial applications; when coated with 2-pack polyurethane it has been tested for the following agents:

  • Caustic Soda - oven cleaners - should not affect top.
  • Hydrochloric Acid - cement cleaners - should not affect top.
  • Kitchen Acids/Alkalis - juice/vinegar - should not affect top.
  • Staining Agents - the only ones to avoid are beetroot and English mustard; these fiendish substances seem to stain everything known to man, but effect is minimal.
  • Wines/Spirits - should not affect top.
  • Heat - Tops have been tested to 200C; anything that contains water should not affect top. Tops will take much higher levels of heat for short periods (1/2 minute maximum). This allows time to put down a very hot item and retrieve again with an oven mitt.

Recoating - Your top will not require recoating for many years (dependant on wear and usage) and then only in the high-use areas. Recoating, which will restore your top to 'as new' condition, can be done by the householder or by a professional.

For more information regarding 2-Pac Polyurethane, feel free to contact us.

Custom Benchtops & Joinery
Unit 2 / 42 Achievement Way
Wangara WA, 6065

Phone: (08) 9303-4854

 

Aff-logos-corian Aff-logos-laminex Aff-logos-polystone Aff-logos-formica